実際に現物比較したわけではないが、同クラスのJETの製品はテーブルを上下するハンドルが前面にあり、機構的に無理?があり遊びが多そうに感じたのでこちらを選んだ。SHOP
FOXのモバイルベースに載せている。
以前使用した卓上型と比較してコンソール以外は鋳鉄でとにかく堅固、動作音も静かで、カッターヘッドが6"と小さいので風騒音も小さい。
ロングベッド、ロングフェンスは長尺材の加工に余分な気を使うことなくて便利。
スイッチ位置は低くてやや操作しにくい。それと薄めの材を加工する際に、ベッドとカッターヘッドカバーに挟まることがあり要調整。
| Part Number | 1791279DXK | ||
| Cutting Capacity (W x D) | 6 x 1/2 " | ||
| Cutterhead Speed | 6000 RPM | ||
| Cuts Per Minute | 18000 | ||
| Number of Knives (Helical/Standard) | 3 | ||
| Standard Knife Size (L x W x T) | 6 1/6 x 3/4 x 5/64 " | ||
| Rabbeting Capacity | ½ " | ||
| Rabbeting Ledge | 9 x 2 1/2 " | ||
| Table Height | 31½ " | ||
| Table Size (L x W) | 66 x 7 1/4 " | ||
| Infeed Table Length | 32½ " | ||
| Outfeed Table Length | 32½ " | ||
| Fence Size (L x H) | 38 x 4 " | ||
| Fence Tilts | 45 ° left, 45 ° right | ||
| Fence Positive Stops | 45 ° left, 45 ° and 90 ° right | ||
| Dust Port Outside Diameter | 4 " | ||
| Dust Collection Minimum CFM Required | 800 cu.ft/min | ||
| Motor Power | 1 HP | ||
| Motor Phase | 1 Ph | ||
| Motor Voltage | 115 / 230 V | ||
| Prewired Voltage | 115 V | ||
| Motor Current | 13 / 6.5 A | ||
| Model Number | 54A | ||
| Brand | Powermatic | ||
| Overall Dimensions | 66 x 24 x 37-1/2 | ||
| Height | 37.5 inch | ||
| Width | 24 inch | ||
| Length | 66 inch | ||
| Net Weight | 328 pound |
| Details |
|---|
| The cutterhead features three auto-set knives that automatically align themselves in the cutterhead |
| 66" long adjustable infeed and outfeed tables provide more working surface |
| Fine/quick adjustment lever on infeed table for precision cuts |
| Extra-long 38" two-way tilting fence with positive stops provides quick positioning for 90° or bevel cuts |
| Enlarged sheet metal stand provides a sturdy base |
| 1HP motor offers plenty of power |
| Built-in ledge for 1/2" rabbeting capacity |
| Fence controls are center-mounted for convenience |
| Push button switch is lockable to prevent accidental starting |
| 4" port for dust collection |